Why won't my Walgreens WGNBPW-200 Blood Pressure Monitor turn on?
If your Walgreens Blood Pressure Monitor isn't turning on, the batteries may be dead. Replace them with two new AAA alkaline batteries. Also, ensure the batteries are inserted with the correct polarity.
What to do if my Walgreens WGNBPW-200 Blood Pressure Monitor shows E2 error?
If your Walgreens Blood Pressure Monitor displays an E2 error, it means you likely moved or talked during the measurement. Keep your wrist steady and remain still while measuring again.
What does 'out' error mean on Walgreens WGNBPW-200?
The 'out' error on your Walgreens Blood Pressure Monitor indicates the pressure measurement was out of range or there was excessive body movement during measurement. Turn the unit off and measure again, keeping your arm steady.
How to fix E1 error on Walgreens Blood Pressure Monitor?
The E1 error on your Walgreens Blood Pressure Monitor means the cuff was placed incorrectly or there's an air circuit abnormality. Ensure the cuff is wrapped properly and positioned correctly, then measure again.
What does EE error mean on Walgreens WGNBPW-200?
The EE error on your Walgreens Blood Pressure Monitor indicates a system error. Turn the monitor off and measure again. If the EE error persists followed by any other character, contact Consumer Relations.
What to do if Walgreens Blood Pressure Monitor shows E4 error?
If your Walgreens Blood Pressure Monitor is showing an E4 error, it means there was an error determining the measurement data. Relax for three minutes and then measure again.
What does E3 error mean on Walgreens Blood Pressure Monitor?
The E3 error on your Walgreens Blood Pressure Monitor indicates that the pulse signal was not detected. Please measure again.
Definition and explanation of blood pressure.
Importance of monitoring blood pressure for health.
General| Brand | Walgreens |
|---|---|
| Model | WGNBPW-200 |
| Category | Blood Pressure Monitor |
| Language | English |
To Next Page