How to fix a Walgreens WGNBPW-720 Blood Pressure Monitor that won't turn on?
If your Walgreens Blood Pressure Monitor doesn't turn on when you press the START/STOP button, the batteries may be dead. Try replacing them with two new AAA alkaline batteries. Also, ensure that the battery polarities are correctly positioned. If they are not, re-insert the batteries in the correct positions.
Why does my Walgreens WGNBPW-720 Blood Pressure Monitor show the E1 error?
If your Walgreens Blood Pressure Monitor displays the E1 error symbol, it indicates an air circuit abnormality. Try measuring again to see if the issue resolves.
What does E3 error mean on Walgreens Blood Pressure Monitor?
If your Walgreens Blood Pressure Monitor displays the E3 error symbol, it means there was an error determining the measurement data. Try taking the measurement again.
What to do if my Walgreens WGNBPW-720 shows the EE error?
If you see the EE measurement error symbol on your Walgreens Blood Pressure Monitor, or if the blood pressure value seems too low or high, make sure you've wrapped the cuff correctly. Reposition it and measure again. Also, avoid talking or moving during the measurement and keep your wrist steady. Shaking your wrist with the cuff on can also cause this error.
What to do if my Walgreens WGNBPW-720 Blood Pressure Monitor shows the E2 error?
If your Walgreens Blood Pressure Monitor displays the E2 error symbol, it means the inflation pressure exceeded 300 mmHg. Try switching the unit off and then measure again.
General| Brand | Walgreens |
|---|---|
| Model | WGNBPW-720 |
| Category | Blood Pressure Monitor |
| Language | English |
Details recommended separation distances for RF communication equipment.
To Next Page
