To Next PageTo Next PageWhy does my Walgreens Blood Pressure Monitor show incorrect readings?
An incorrect cuff alignment could be the reason for high or low blood pressure readings. Refer to page 16 (Applying the Cuff) for directions.
What to do if Walgreens BD-1234W Blood Pressure Monitor value seems too high or too low?
If your blood pressure reading seems incorrect, the circuitry may be locked. To resolve this, remove and reinsert the batteries, and then try taking the measurement again.
What to do if the flashing replace battery symbol appears on my Walgreens BD-1234W?
If the flashing replace battery symbol is showing, the batteries have run down. Replace them with 4 "AA" batteries to continue measuring your blood pressure without interruption. Also, read page 16 (Applying the Cuff).
Explains advantages of home monitoring for health management and alleviating White Coat Hypertension.
Defines blood pressure, systolic/diastolic pressure, and normal reading guidelines.
States the monitor is clinically tested and meets accuracy limits prescribed by standards.
Details the steps for taking a measurement, including inflation, deflation, and reading display.
Explains how to store readings in memory zones and recall stored measurements.
Helps users identify and resolve common error symbols and measurement issues.
General| Model Number | BD-1234W |
|---|---|
| Brand | Walgreens |
| Category | Blood Pressure Monitor |
| Type | Upper Arm |
| Display | LCD |
| Irregular Heartbeat Detection | Yes |
| WHO Indicator | Yes |
| Automatic Shut-off | Yes |
| Measurement Range | Pressure: 0-299 mmHg; Pulse: 40-180 Pulses/Minute |
| Memory | 60 readings |
