Walker H27i - Safety, Control, and Instruction Decals

Safety Instructions
14
SAFETY, CONTROL, AND INSTRUCTION DECALS
Safety, Control, and Instruction Decals are installed on the machine;
if any are missing, illegible, or damaged, a replacement should be ordered and installed before
putting the machine into operation. The Decal Part Number is listed below and in the Parts Manual.
Location: Deck Carrier Frame
Part Number: 8600-14
8600-14
1.
1. Warning – do not operate the machine with the
deck tilted up.
Location: Chassis Member Behind Transaxles
Part Number: 9804-1
9804-1
1.
1. Neutral Lock
● Lift and move back to engage step to unlock
transmission and allow machine to free
wheel.
Location: Engine
Part Number: 8600-12
8600-12
1.
1. Warning – carbon monoxide (CO) poisoning
hazard.
● CO emitted by a running engine can be deadly.
● Do not operate indoors or in other enclosed
areas.
Location: Rear Body Near Mu󰀪er
Part Number: 8600-5
8600-5
1.
1. Warning – hot surface, do not touch.
Location: Deck Carrier Frame
Part Number: 8600-15
1.
1. Warning – lock deck tiltup hinge before operat
ing the machine.
1. Grease PTO shaft joints every 8 hours.
Location: PTO Guard on Deck
Part Number: 8746-2
Location: Each End of Mower Deck
Part Number: 8600-28
1. Warning – thrown object hazard.
● Keep bystanders away from the machine
when operating.
● Clear lawn of debris before operating.
● Keep any discharge deector in place and in
the lowest position.
2. Warning – rotating mower blades are a cutting/
dismemberment hazard to hands and feet.
● Keep all body parts away from rotating mow
er blades.
● Do not step on end of deck.
1.
8746-2
8600-28
1.
2.
Location: Underside of Rear Body, Behind Seat
Part Number: 5855