Walker H27i - Page 31

Assembly Instructions
27
Tilt Bar
TiltUp
Hook
TiltUp
Latch
TiltUp Hook and
Latch Connected
Hitch Pin
Deck Secured in TILT-UP Position
CHECK MOWER BLADE CONDITION,
SHARPNESS, AND SECURITY OF MOUNT
ING
The blade mounting nuts on gear driven decks
should be torqued to 60 lb·ft (81 N·m), and the
blade mounting bolts on belt driven decks torqued to
70 lb
·ft (95 N·m). If blade sharpening is required,
refer to CHECKING/SERVICING for Sharpen Mow-
er Blades in
Maintenance Instructions.
PERFORM ANY ADDITIONAL PROCEDURES
called for on the MAINTENANCE SCHEDULE
CHART in Maintenance Instructions.