Walker MBK23 - Blade Drive; Tire Size; Tire Pressure; Drive Belts

Specications
4
MODEL MBK23
TRANSMISSION (continued)
Neutral Transmission Release by Manual Dump Valve
Final Drive Transaxle Direct to Drive Wheel
Transmission Fluid
Factory Service 20W-50 Multi-Viscosity Motor Oil (Minimum SL Grade Oil)
Transmission Capacity 79  oz (2336 ml)
Transmission Cooling Cooling Fan Mounted on Drive Pulley
Oil Filter Hydro-Gear
®
P/N 52114 (Walker P/N 2026-6)
Ground Travel Speed
Forward m.p.h. (km/h)
Reverse m.p.h. (km/h)
0-8 (0-13) Innitely Variable
0-5 (0-8) Innitely Variable
BLADE DRIVE
PTO Shaft Quick Disconnect Splined Shaft with Two (2) High-Speed U-Joints
Blade Drive Clutch and Brake Manual Belt Tightener Clutch and Band Brake
[Stops Blades within Five (5) Seconds of Disengagement]
TIRE SIZE
Deck Caster Wheel 2.80/2.50-4 Pneumatic (4-Ply)
Deck Caster Wheel (Optional) 8 x 3.00-4 Foamed Rubber
Drive 18 x 8.50-10 (4-Ply Low-Prole)
Rear 11 x 4.00-5
TIRE PRESSURE
Deck Caster Wheel 20 PSI (137 kPa)
Drive 15 PSI (103 kPa)
Rear 20 PSI (137 kPa)
DRIVE BELTS
Engine PTO Walker P/N 4230-1
Ground Drive Walker P/N 4248
SEAT Contour-Molded, with Nylon Backed Vinyl Cover and
Integral Foam Cushion
FRAME/BODY CONSTRUCTION
Frame/Body 3/16 Plate Steel
Deck 11 Gauge Steel