EasyManua.ls Logo

Walker S14i - Maintenance Instructions; Maintenance Schedule Chart

Walker S14i
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance Instructions
48
MAINTENANCE SCHEDULE CHART - RECOMMENDED SERVICE INTERVALS - MODEL S14i
Service Item
Daily
25
Hours
100
Hours
400
Hours
Yearly
Every
2 Years
Ref.
Page
Check Engine Crankcase Oil Level x 50
Check/Clean Engine Air Cooling System* x 59
Clean Grass Buildup Under Deck x 60
Clean GHS Exhaust Screen* x 61
Clean GHS Blower* x 61
Service Mower Blades x 64
Check Security of Air Filtration Components x 63
Lubricate Grease Fittings and Oil Points* x 51
Check Battery Electrolyte Level x 63
Check Transaxle Fluid x 55
Check Tire Pressure x 64
Check Drive Belts (Engine, PTO, Ground Drive) x 65
Check Deck Gearbox Oil Seals x 65
Check Safety Switch System x 67
Clean or Replace Air Cleaner Precleaner* x 58
Change Engine Crankcase Oil** x 51
Check/Clean Air Filter Element* x 58
Clean Transaxle Housing x 62
Check Security of Drive Tire
Mounting Nuts (75 to 85
lb·ft)
x 64
Check Blade Brake Action x 66
Check/Adjust Blade Clutch x 79
Replace Air Filter Element*** x 58
Change Transaxle Oil and Filter
Δ
x 56
Check/Adjust Engine Valve Clearance x 66
Replace Fuel Filter x 72
Clean Engine Cooling Fins x 59
Check Fuel Lines and Clamps x 66
Service Battery x 63
Check/Adjust Vertical Position of
Grass-Pak
®
Switch
x 82
Check/Adjust FSC Friction Lock x 67
Check Transmission Control Settings x 66
Check PTO U-Joints for Wear/Looseness x 67
Check/Regap Spark Plug x 66
Replace Fuel Lines and Clamps x 66
Replace Ignition Wire x 66
* More often in extremely dusty or dirty conditions (refer to notes about air cleaner element in
IMPORTANT TIPS FOR CARE OF THE KOHLER ENGINE)
** Change engine oil after rst 5 hours of operation of a new engine (break-in period)
*** Air cleaner is engine mounted Kohler Quad-Clean
unit, replace lter every 400 hours or when worn or damaged
Δ Change transaxle oil after the initial break-in period of 75-100 hours operation
CAUTION
Maintenance procedures requiring special training or
tools should be performed by a trained technician.

Table of Contents

Related product manuals