Maintenance Instructions LUBRICATION
55
Grease Fitting
RH Transaxle
(Reference)
PTO Tube On
Tractor Assembly
Grease Fitting Location
(View From Above Transaxles)
3. Use a grease gun to add grease until it seeps
out of the seals. Wipe away any excess grease.
DO NOT over grease.
Using Grease Gun On U-Joint
Check Transaxle Fluid Level
● The transaxle oil lubrication is SAE 20W-50 (API
Service Class SL or higher) engine oil.
● Inspect both transaxle cases after every 25
hours of operation for visible leaks.
● The uid level of the transaxles can be checked
visually by looking at the uid level in the expan-
sion reservoir. When the transaxles are cold, the
uid level in the expansion reservoir should be
between 1/4 in. and 1/2 in. (0.64 cm and 1.27 cm).
Cold Level
Reservoir Cap
Hose to
Transaxles
Hot
Level
Expansion Reservoir Location
To Next Page
Loading...
