16
www.WalkinPets.com
Optional Set Screws for Noise Reduction
Using the set screws will tighten up your wheelchair and reduce any
rattling noises. The set screws also keep the wheelchair tight aer it
has been adjusted for your dog. When you tighten up the wheelchair,
the side arms, called extenders, will be able to move up and down as
your pet turns corners. This is completely normal. The flexibility also
allows for ease of movement on uneven terrain. There are six places
to put the set screws using the Allen wrench. They are indicated
below with red arrows.
Note: Make sure the set screws shown below are loosened or
removed before making adjustments.
Belly Belt, if Needed
Some animals will need additional support under their belly. You can
determine if the dog needs additional support if their spine bows
downward. It is also helpful for overweight dogs or dogs with spinal
or disc issues. One end of the belly belt has a tri-glide (rectangular
with bar in the middle) attached and the other side has Velcro
®
strapping. Both sides have a rope with a push button adjuster
(instructions on p.17).
Go here to see a video on how to attach the Belly Belt to your
Walkin' Wheels: hpets.net/bellybelt
To Next Page
Loading...
