Walkin’ Pets Wheels Medium - Parts of the Walkin Wheels Rear Medium Wheelchair

4
www.WalkinPets.com
Parts of the Walkin’ Wheels
®
Rear Medium Wheelchair
Aluminum
wheelchair frame; Width
Connector installed
Knuckle
(attached to frame)
One Belly Belt
for mid-section support
(use if needed)
Tool kit with Allen wrench
and cup screws for noise
reduction (use if desired)
Stirrups to keep feet from
dragging (use if needed)
Leg Rings for
rear support
Front Harness with
comfort sleeves,
fully adjustable
Wheels attached to Struts
(one set for each wheelchair)
Several sizes shown here.
Length Extenders.
The 15" extenders are
installed in the frame.
The 26" extenders are
used for longer dogs
15"
26"
Width Connectors. The
6" connector is already
installed in the frame.
Extra 9" connector for
wider dogs
6"
9"
12"
4"
8"
16"