17
(888) 253-0777
Air-Filled Foam
A. Take the side with the tri-glide and put the extender through the
end of the loop.
B. Take the rope and put inside the harness clip on the extender
(B). Then, attach the front harness to the harness clip in order to
secure the rope. This will keep the belly belt from sliding back-
wards. Now, adjust the belly belt so it is in the middle of the
dog’s belly.
C. Secure the other side over the extender and Velcro to bottom of
belly belt. The purpose of the belly belt is to provide support for
your dog’s mid-section.
If your dog needs more support, you can
purchase the Walkin' Belly Support:
www.WalkinPets.com/walkin-belly-support
Wheel Options
We offer four size wheels: 4", 8", 12", 16"
If you find out your RLH measure wasn't correct, you can purchase
different size struts to switch out. www.walkinpets.com/struts
We only provide air pneumatic tires in 12" and 16" if it fits your pet.
Figure A Figure B Figure C
Air Filled vs Foam Filled
To Next Page
Loading...