Walkin’ Pets Wheels Medium - In the Package; Assembling Fully Supportive Wheelchair; Attaching Legs and Extenders

19
(888) 253-0777
In the Package
The Front Wheel Attachment is easy to assemble and snap into the
wheelchair. You will need a Phillips head screwdriver. The package
contains:
A Le and right extenders (2)
B Struts and caster wheels (2)
C Legs (2)
D Chin bar & extension
pieces (3) Optional
E Allen key for leg screws
F Chin bar screws
(plastic bag)
G Chin bar comfort cover (1)
H Front leg rings
IMPORTANT: The LEFT and RIGHT Struts and Casters (B) must match
the LEFT and RIGHT Legs (C). If they are not installed correctly the
wheelchair will be extremely wobbly. We refer to L and R as if you
are in the wheelchair.
Assembling Fully Supportive Wheelchair
Here is the video if you have purchased the quad wheelchair:
www.walkinpets.com/instructional-videos-medium-fully-supportive-dog-
wheelchair
Step 1: Attaching the legs (C) to the extenders (A)
The top of each leg is labeled with an L or an R. It is crucial that the
legs are installed on the correct side. The extenders are not labeled
L or R, but the shoulder socket screws face the outside.
Attach the leg
to the extender
with (2) screws
using the larger
Allen key. The
legs will be at a
forward angle.
Le/Right