22
6. Connect the hydraulics:
a. Use a clean rag or paper towel to clean the
dirt from the couplers on the hose ends and
the skid steer.
b. Connect the hoses to the skid steer cou-
plers. Be sure the couplers are securely
seated.
c. Route and secure the hoses along the frame
with clips, tape or plastic ties to prevent bind-
ing and pinching. Be sure to provide slack
for tilting.
Hoses
Fig. 12 HYDRAULICS
NOTE
Clip the plastic ties securing
the hoses for shipping if this
is the rst time the splitter is
mounted.
Coupler
Connected
To Next Page
Loading...
