24
4.9 FIELD OPERATION
Follow this procedure when using the splitter:
1. Prepare the Skid Steer and splitter (refer to
section 4.7)
2. Attach splitter to the skid steer (refer to Sec-
tion 4.8).
3. Review and follow the pre-operation check-
lists (refer to Section 4.4).
4. Review the location and function of all con-
trols (refer to Section 4.5)
5. Review the work site and plan the project
before starting.
6. Transport the splitter to the worksite (refer to
Section 4.10).
OPERATING SAFETY
• Read and understand the Operator’s Manual
and all safety signs before operating, servic-
ing, adjusting, repairing or unplugging.
• Do not allow riders.
• Install and secure all guards and shields
before starting or operating.
• Keep hands, feet, hair and clothing away
from moving parts.
• Place all controls in neutral, stop tractor
engine, set park brake, remove ignition key
and wait for all moving parts to stop before
servicing, adjusting, repairing or unplugging.
• Place all tractor and machine controls in
neutral before starting.
• Always wear the appropriate personal safety
equipment when operating splitter including
but not limited to hard hat, safety shoes, face
shield and heavy gloves.
• Clear the area of bystanders, especially
small children, before starting.
• Do not operate on slopes or sidehills.
• Keep working area clean, neat and dry to
prevent slipping and tripping.
• Keep all mechanical and hydraulic compo-
nents in good condition. Do not operate
with leaks or damaged components.
• Load splitter by holding logs on the side
rather than the top and bottom.
• Do not split wood across the grain.
• Review safety instructions with all operators
annually.
To Next Page
Loading...
