36
Wedge moves slowly. Pump worn out. Replace pump.
Low oil ow. Increase engine RPM.
Low oil level. Check oil level. Add as
required.
Wedge doesn't move. Wood jammed around Remove wood.
wedge.
Low oil level. Check oil level. Add as
required.
Wedge jumps. Wedge frame jamming. Lubricate wedge frame wear
plate.
6 TROUBLE SHOOTING
The Wallenstein Woodsplitter is designed to t on the front of a skid steer loader and is used to split wood
or logs. It is a simple and reliable system that requires minimal maintenance.
In the following section, we have listed many of the problems, causes and solutions to the problems that
you may encounter.
If you encounter a problem that is difcult to solve, even after having read through this trouble shooting
section, please call your local distributor or dealer. Before you call, please have this Operator's Manual
from your unit and serial number ready.
PROBLEM CAUSE SOLUTION
To Next Page
Loading...
