Walther Systemtechnik VMS-02 - 10 Appendix; Dimensioned Drawing with Long Nozzle (LV-Version); Dimensioned Drawing with Short Nozzle (KV-Version)

Rev. 1.4
Assembly Instructions – Full-Jet Valve VMS-02
Page 13 of 19
Walther Systemtechnik GmbH – D 76726 Germersheim
Telefon: +49 (0)7274-7022-0 Telefax: +49 (0)7274-7022-91
http://www.walther-2000.de – info@walther-2000.de
10 Appendix
10.1 Dimensioned Drawing with long Nozzle (LV-Version)
10.2 Dimensioned Drawing with short Nozzle (KV-Version)
ca. 162
40
1830
17
t= 15mm
ca.82
M5
7.5
ca. 144
1830
17
7.5
ca. 82
22
M5
t= 15mm