Wampler TERRAFORM User Manual

WAMPLER TERRAFORM Page
2
POWER
This pedal was designed around the use
of a 9v power source. To avoid damage
to this pedal, do NOT exceed 18vDC (it
can take it, but 9v is where it works
best), do not use center pin positive
adapters and do NOT use AC power.
Using an incorrect power adapter can
lead to damage and will void the
warranty on the pedal. This pedal
draws approximately 107mA at 9v and
approximately 108mA at 18v.

Wampler TERRAFORM Specifications

General

Presets	8
Bypass	True Bypass
Power	9V DC
MIDI	In/Out
Input Impedance	1M Ohm
Power Requirements	9V DC, Center Negative
Effects	Chorus, Flanger, Phaser, Rotary, Tremolo
Inputs	1 x 1/4"
Outputs	1 x 1/4"
Controls	Preset
Output Impedance	100 Ohm