5.1 Important Basic Information
Lock, cam and service key will be ordered seperately. A complete order or inquiry
comprises 3 order numbers:
1. Order no. cam
2. Order no. lock
3. Order no. service key
Cam and fixing elements are standardly delivered unmounted. On request the cam
can be premounted as well. The needed specification for that will be done according to
order matrix 5.2.
Important: If you want the cam premounted please make sure that the lock with fixed
cam still fits through the 16x19 pircing hole. That mainly depents on the cam shape and the
panel thickness.
The factory-set code is 0-0-0-0.
For security reasons please keep the number of service keys at a minimum.
Service keys and locks are provided with key numbers. For security reasons the key
number of the lock is on the back.
Each order quantity will be delivered keyed to pass. This means that all locks have the
same key number (differ number), with one key opening all.
If you need different key numbers e.g. in order to equip different rooms or permissions
please split the order quantity in different key numbers.
For the service cylinder please chose one of the standard key numbers according the order
matrix 5.3. On request there are additional 200 key numbers available.
For short delivery times please prefer the given standards from the order matrices.
But special designs such as differnt colours or something else can also be requested
at any time.
Beispiel: C1402-3-4-20-30-DO
Beispiel: L1402-G-051-R-09-H
Beispiel: S1402-051
(Bestellmatrix 5.2)
(Bestellmatrix 5.3)
(Bestellmatrix 5.3)
- 8 -
5. Ordering Information 1402 "One-Timer"
To Next Page
Loading...