3.1 Wi-Fi Setup
Chapter3 Setup Mode
Note: The camera can only support 2.4Ghz Wi-Fi, it doesn’t support 5Ghz Wi-Fi.
① Place the camera near the router within 3 feet and power on the camera with the attached
power cord. Make your phone use the 2.4G Wi-Fi.
② Tap 【Add Device】 on the APP, and choose the camera model Q5 or Q6.
③ Check if the camera's indicator light is flashing red and blue, if yes, tap【Flashing】.
1
2
3
06
To Next Page
Loading...
