To Next PageTo Next Page
Need help?Do you have a question about the WarmFlow Agentis E26 Pro and is the answer not in the manual?
General| Output Power | 26 kW |
|---|---|
| Fuel Type | Natural Gas |
| Dimensions (H x W x D) | 700 x 400 x 300 mm |
| Weight | 32 kg |
| Category | Boiler |
| Type | Condensing boiler |
Controls radiator temperature and the built-in manually reset safety cut off.
Indicates burner fault or lack of fuel; limits user resets.
Monitors and guides on maintaining correct system water pressure.
Identifies control panel buttons and the LCD for operation.
Adjusts the central heating water temperature setpoint.
Adjusts the domestic hot water temperature setpoint.
Ensures the heating system is clean and free of debris before installation.
Details the correct routing and installation of the condensate drain.
Assesses safety of hot water outlets and compliance with regulations.
Evaluates the expected hot water usage for the installation.
Verifies adequate mains water supply pressure and flow rate.
Lists performance specifications and data for boiler models.
Covers wiring connections, terminals, and diagrams.
Instructions for programming heating and hot water schedules.
Guidance on maintaining and checking system pressure.
Identification of RDB BX burner components.
Correct positioning of burner electrodes for optimal performance.
Final checks and setup procedures required for installation.
Guidelines and requirements for annual appliance maintenance.
Troubleshooting chart for the Riello RDB BX burner.
List and explanation of error codes shown on the appliance display.
How to access and interpret historical error codes.
Diagnostic guide for troubleshooting central heating issues.
Diagnostic guide for troubleshooting domestic hot water issues.
