WarmFlow Agentis E26 Pro - Using the Built in Programmer (Combination Boiler Models)

Page 64
6.6 Using the built in programmer (Combination Boiler models)
The built in programmer can be used if this feature was enabled by the installer,
consult with your installer for further information.
It has the following features:
Feature CH DHW
Day Programming 7 days 7 days
Time Slots 4 per day 4 per day
Boost 1,2,3 hours 1,2,3 hours
Advance Yes Yes
Continuous Yes Yes
Temperature
Profiles
N/A DHW Setpoint 1 & Setpoint 2
Day Copy Yes Yes
The programmer is supplied with the following factory default settings:
CH DHW
Slot ON OFF ON OFF DHW Setpoint
1 06:30 08:30 06:30 08:30 1
2 --:-- --:-- --:-- --:-- 1
3 --:-- --:-- --:-- --:-- 1
4 16:30 22:30 16:30 22:30 1
For maximum DHW efficiency, use a lower Setpoint for DHW setpoint 2 if
possible, and use OFF periods in the DHW programming to suit user
requirements.