To Next PageTo Next Page
Need help?Do you have a question about the WarmFlow Agentis Series and is the answer not in the manual?
General| Installation Type | Wall-mounted |
|---|---|
| Type | Condensing |
| Dimensions | 700 x 400 x 300 mm |
| Efficiency | Up to 93% |
| Control | Digital |
| Heating Capacity | Varies by model |
| Warranty | 5 years |
Description of the dual thermostat and its manual reset safety cut-off feature.
Explanation of burner lockout indication and reset procedure.
Guidance on checking and maintaining system pressure in sealed systems.
Instructions on using the filling loop to top up system pressure.
Overview of the control panel buttons, LCD display, and operating modes.
Description of the default display when the appliance is powered on or reset.
Instructions on how to adjust the central heating flow temperature setpoint.
Instructions on how to adjust the domestic hot water flow temperature setpoint.
Explanation of how weather compensation adjusts CH flow temperature based on outdoor temp.
Comprehensive technical specifications for different boiler series and models.
Wiring details for internal and external combination boilers.
Guidelines for minimum distances for flue terminal placement.
General requirements and standards for boiler installation.
Procedure for setting the electrodes correctly for optimal burner performance.
Guidance on adjusting the air damper for optimal combustion.
Procedure for adjusting the combustion head for output changes.
Essential steps and responsibilities for boiler commissioning.
General requirements and procedures for annual boiler servicing.
List of error codes, their causes, and corrective actions for combination boilers.
Troubleshooting table for central heating issues.
Troubleshooting table for domestic hot water issues.
