WarmFlow Agentis Series User Manual

Page 129
16 END OF LIFE INFORMATION
Warmflow High Efficiency Condensing Boilers must be disposed of according to local regulations by
using a public or private waste collection service.
16.1 Safety Risks
Prior to disassembly, the appliance should be electrically isolated and disconnected.
Any fluids within must be drained, and disposed of in-line with local regulations.
Care should be taken when handling the appliance due to weight, use appropriate PPE and lifting aids.
Glass fibre insulation – suitable PPE should be used for respiration protection, and to avoid skin or eye
contact.
16.2 Disassembly of the Product
The main materials of the components are:
 Mild Steel
 Stainless Steel
 Copper
 Brass
 Ceramic Fibre
 Plastic components
 Electronic components
These may be recycled – depending on the local recycling facilities available.
The appliance assembly includes various mechanical fasteners and can be disassembled with standard
tools.
The components of a typical appliance including heat generator are shown (not all components may be
fitted, depending on appliance specification).

WarmFlow Agentis Series Specifications

General

Installation Type	Wall-mounted
Type	Condensing
Dimensions	700 x 400 x 300 mm
Efficiency	Up to 93%
Control	Digital
Heating Capacity	Varies by model
Warranty	5 years