WarmFlow Agentis Series User Manual

Page 11
1.5 Corrosion Inhibitor
Special attention must be given to the concentration of corrosion inhibitors in the
system water where there is a need for topping up. Concentrations must be
restored to inhibitor manufacturers’ recommendations and monitored going
forward.
Frequent or routine topping up of the system should not be necessary and
may prove harmful to the appliance. Should topping up prove necessary on
a frequent or routine basis you must contact Warmflow or your installer.
Perfector 2 Side:Back
CyanMagentaYellowBlackM1M2

WarmFlow Agentis Series Specifications

General

Installation Type	Wall-mounted
Type	Condensing
Dimensions	700 x 400 x 300 mm
Efficiency	Up to 93%
Control	Digital
Heating Capacity	Varies by model
Warranty	5 years