WarmFlow Agentis Series User Manual

Page 94
8.1.10 Flexible Flue Liner Kit (HFL & VFL)
These boiler connection kits (F16 or F18) contain:
Installation instructions
FIT FLUE THERMOSTAT
1. Fit the flue thermostat BEFORE fitting the flue.
FIT STARTER PIECE
2. Remove the top casing panel cut-out using snips. Fit the boiler adapter (A).
3. Lubricate the seals then insert the starter assembly (B).
Perfector 7 Side:Front

WarmFlow Agentis Series Specifications

General

Installation Type	Wall-mounted
Type	Condensing
Dimensions	700 x 400 x 300 mm
Efficiency	Up to 93%
Control	Digital
Heating Capacity	Varies by model
Warranty	5 years