WarmFlow Agentis Series User Manual

Page 21
1.17 User Parameters
The User Parameters Menu is used to allow selected parameters to be modified by the user,
without password protection.
The User Parameters Menu is displayed from the Home Screen by pressing the Information
button (5) for 3 seconds.
The auxiliary digits then indicate the displayed variable number, and the main digits display the
value.
To modify a value, press the Mode button (3) for 1 second.
The service icon will begin to flash.
Adjust the variable setting to the desired value using the DHW+ button (1) and DHW- button (2).
To save the new value, press the Mode button again for 1 second.
The Service icon will stop flashing.
To return to the Home Screen, press the Information button (5) again, or if no button is pressed
for 3 minutes, the LCD will return to the Home Screen automatically.
Parameter number Description Units Range Default Value
u 00 Weather Compensation Coefficient
(see note)
N/A 0-30 30
Note: If the remote control is also used, the remote control setting will override the parameter
u00 value.

WarmFlow Agentis Series Specifications

General

Installation Type	Wall-mounted
Type	Condensing
Dimensions	700 x 400 x 300 mm
Efficiency	Up to 93%
Control	Digital
Heating Capacity	Varies by model
Warranty	5 years