WarmFlow Agentis Series User Manual

Page 84
8.1.4 High Level Balanced Flue Kit (HBF)
The kit comprises:
FIT FLUE THERMOSTAT
1. Fit the flue thermostat BEFORE fitting the
flue kit.
FIT STARTER PIECE
2. Remove the appropriate casing panel cut-
out using snips, deburr edges. Ensure the
gasket is placed correctly, then fit the boiler
adapter, and secure with 4x M6 nuts (A).
3. Lubricate the seals, then insert the starter
assembly (B).

WarmFlow Agentis Series Specifications

General

Installation Type	Wall-mounted
Type	Condensing
Dimensions	700 x 400 x 300 mm
Efficiency	Up to 93%
Control	Digital
Heating Capacity	Varies by model
Warranty	5 years