WarmFlow B-Series B70 User Manual

Page 61
12.1.2 Built in Programme
For convenience, the timer module has a built in programme, however, it can be
easily adjusted (see section 12.5 To Change the Programmes).
The timer offers 3 options for both CH and HW programme period.
OFF: Off all the time.
AUTO: To run your time schedule for period one or two or three each day.
ON: Turn on all the time.
Factory Present Time Schedule
12.1.3 To Set Current Time & Day
1. Press and hold
CLOCK button then press DAY button to select current day
of the week.
2. Press and hold
CLOCK button then press HOUR button until the correct
hour is displayed.
3. Press and hold
CLOCK button then press MINUTE button until the correct
minute is displayed.
12.1.4 Select Operation Mode
Press CH SELECT / HW SELECT button to select operation mode to be
OFF,
AUTO, ON.
22:3022:30
16:30
14:00
12:00
10:30
07:30
22:3022:30
16:30
14:00
12:00
08:30
06:30
HW/CH2CH/CH1
16:30
14:00
12:00
08:30
06:30
16:30
14:00
12:00
10:30
07:30
HW/CH2CH/CH1
Mon – Fri
Time Schedule
Mon – Fri
Time Schedule
PERIOD 1 ON
PERIOD 1 OFF
PERIOD 2 ON
PERIOD 2 OFF
PERIOD 3 ON
PERIOD 3 OFF
Switching

WarmFlow B-Series B70 Specifications

General

Brand	WarmFlow
Model	B-Series B70
Category	Boiler
Language	English