Warn PULLZALL 24Vdc - Page 10

987606A1.doc Page 10 of 46
2.2.3 INSPECTION OF BATTERY
• Inspect the Battery is not cracked or damaged.
• Inspect whether the release button in hold position or not.
Safety Rules & Guidelines:
• Battery tools are always in an operative condition. Be aware of the possible hazards.
Always remove the Battery when the PullzAll
TM
is not in use.
• Battery leakage may occur under extreme usage or temperature conditions. If liquid
comes in contact with skin, wash quickly with soap and water, then with lemon juice or
vinegar. If liquid gets into your eyes, flush them with water for a minimum of 10
minutes and seek medical attention.
• Do not run the PullzAll
TM
while carrying it at your side.
Battery Care:
When Batteries are not in tool, keep them away from the metal objects. For
example: To protect the terminals from shorting. DONOT place
Batteries in a toolbox or pocket with nails, screws, keys, etc. Fire or injury may result.
DO NOT PUT BATTERY INTO FIRE OR EXPOSURE TO HIGH HEAT. They
may explode.
Battery Disposal:
WARNING
Do not attempt to disassemble the Battery or remove any component projecting from
the Battery terminals. Fire or injury may result. Prior to disposal protect exposed
terminal with heavy insulating tape to prevent shorting.