Wascomat EX618 - Heating System

101
1
6562, 6578
Heating
Heating
Description
Electric heating
The heating system of the machine consists of:
• Threeheatingelementsforheatingthewater
in the drum.
• Atemperaturesensortodetectthewater
temperatureinthedrum.
• Oneortwoheatingcontactorsforswitch-on/
switch-offoftheheatingelements.
Theheatingelementsandthetemperaturesen-
sor are situated at the bottom of the outer drum
close to the edge. They can be accessed front
thefrontafterthefrontplateisremoved.
Thecontactor(s)is(are)placedintherearcontrol
unit.
Dependingonthesizeofthemachine,thefol-
lowingheatingelementsareshownasexample.
Furtherisavailable.
Machine Heatingelementsize
model (kW)
EX618 3x0.665,3x1,3x1.8,3x2.5
W/SU20 3x0.665,3x1,3x1.8,3x2.5
EX/W/SU625 3x2.53x3.3
EX/W/SU630 3x2x2.165
EX/W/SU645 3x2x3.0
EX/W/SU660 3x2x3.83
EX677,W/SU677 3x2x3,83
1
Heating elements and
temperaturesensor
Contactor