40
Trouble shooting
If machine runs slowly on wash speed or there
is a slapping or thumping noise
A Replace the V-belts.
If a metallic noise can be heard at rear of
machine
A Tighten the pulley on the motor shaft.
If the door is leaking
A Check the door gasket. If the gasket is in good
condition, install a 4-7 mm rubber O-ring
around the entire gasket, using the slits
provided.
Fig.
68
Fig.
67
Fig.
69
69
1176
67
1748
68
1175
A
To Next Page
Loading...
