11
1
© WASP S.r.l.
ELECTRICAL NATURE INTERVENTIONS
Every electrical adjustment operation must be carried out taking all the safety measures required by current
regulations.
1.5.1. Personal protective equipment
It is mandatory to use the specific personal protection devices (PPE) to the current operations made available
by the company (in relation to the risk attached to the performance of certain processes), even if not directly
concerning the use of the plant.
1.5.2. Operators for whom the manual is intended
The manual is written for:
• The operators involved in using the machine (in the continuation of the manual will be briefly called “users”);
• Mechanical maintenance workers: trained and authorized operators for the maintenance of mechanical
parts and oil-hydraulic systems;
• Electrician maintenance technicians: trained and authorized operators for the maintenance of electrical and
/ or electronic parts and systems;
• Qualified technicians (employees of the Manufacturer or authorized service center), special maintenance
staff and operations of a complex and / or particular nature.
ATTENTION:
The user must not perform operations reserved for maintenance personnel or qualified technicians.
The manufacturer is not liable for damages deriving from failure to observe this prohibition.
1.5.3. Residual risks
Residual risk of injury
Do not put hands inside of the continuous feeding system while it’s working.
CAUTION:
Moving parts: possibility of cutting and crushing
ATTENTION:
Watch your head, risk of injury.
Residual risk of electrocution
CAUTION:
It is present tension on the superior part of the machine.
Maintenance / Cleaning
Maintenance / Cleaning operations must be carried out by trained and authorized personnel. Operations must
be performed in a safe stop condition, disconnecting the printer from power sources. Refer to paragraphs 7.2.1
“Cleaning” and 7.2.2 “Maintenance”.
Fig. 1.5 b - Do not remove the material intake protection
To Next Page
Loading...