Wasp CLAY - Glossary and Pictograms; Identification of Operating Personnel

13
1
© WASP S.r.l.
1.6. Glossary and pictograms
1.6.1. Identification of operating personnel
The operator responsible for the operation or maintenance of the machine must possess the specific professional
requirements for each intended operation.
The operator must be instructed and therefore be aware of the tasks entrusted to him who has responsibility for
the job.
Below there is a description of the professional profiles for the operators involved in the machine.
User
Qualified personnel, able to perform simple tasks, trained on using the machine.
It supervises the proper functioning of the same and the eventual first intervention in case an alarm condition
occurs.
Mechanical maintenance technician
Qualified technician able to conduct the machine under normal conditions, to intervene on the mechanical parts
to carry out all the necessary adjustments, maintenance interventions and repairs.
It is not enabled to work on electrical systems in the presence of voltage.
Electrical maintenance engineer
Qualified technician able to conduct the machine in normal conditions; it is in charge of all the electrical
interventions of regulation, maintenance and repair. It is able to operate in the presence of voltage inside
enclosures and junction boxes
Manufacturer Technician
Qualified technician provided by WASP S.r.l. to carry out operations of a complex nature in particular situations
or in any case according to what has been agreed with the user.