Wasp CLAY - General Information; Manufacturer Identification Data; Indentification Label

General information
7
1
© WASP S.r.l.
1 GENERAL INFORMATION
1.1. Manufacturer identification data
WASP S.r.l.
Via Castelletto, 104 - 48024 Massa Lombarda (RA) Italy
Tel. +39 0545 87858
info@3dwasp.com / www.3dwasp.com
1.2. Indentification label
The machine is CE marked and complies with all relevant provisions:
Machinery Directive 2006/42 / EC, EMC Directive 2014/30 / EU and LVD Directive 2014/35 / EU
EN 55022
EN 55024
EN 60204-1
The marking can be identified by means of an identification plate of the Manufacturer as required by the Machinery
Directive. In case of damage, the Recipient must commission a copy.
Translation:
1. Modello: Model
2. Rif. TCF: Reference
3. Input: Power input
4. Potenza Max: Maximum power
5. Corrente a pieno carico: Current under full load
6. Numero di serie: Serial number