TABLE OF CONTENTS:
Installation Instructions Page 3-4
Start-up Procedures Page 5-6
Programming the Iron Soft Plus Timer Page 6-8
Light/Alarm Operation Page 9
Water Conditioner Flow Diagrams Page 9-10
Troubleshooting Page 11-12
Parts & Assembly Diagrams Page 13-18
Blank Page 19
Capacity & Physical Specifications Page 20
Your Iron Soft Plus Series water conditioners are precision built, high quality products. These units will deliver
conditioned water for many years to come, when installed and operated properly. Please study this manual
carefully and understand the cautions and notes before installing. This manual should be kept for future
reference. If you have any questions regarding your water conditioner, contact your local dealer.
YOUR WATER TEST
Hardness gpg
Iron ppm
pH number
*Nitrates ppm
Manganese ppm
Sulphur yes/no
Total Dissolved Solids
*Over 10 ppm may be harmful for human consumption. Water
conditioners do not remove nitrates or coliform bacteria, this
requires specialized equipment.
CAUTION: The manufacturer does not recommend the use of any
resin cleaners. Please refer to page 6 in this manual or the warning
label on the back of the brine tank.
To Next Page
Loading...
