Need help?Do you have a question about the Water Right ISP2-1354 and is the answer not in the manual?
General| Brand | Water Right |
|---|---|
| Model | ISP2-1354 |
| Voltage | 120V |
| Hot Water Temperature | Not Applicable |
| Cold Water Temperature | Not Applicable |
| Dispensing Options | Not Applicable |
Details on inlet/outlet connections, bypass valve, brine line, drain line, and overflow lines.
Steps for initial setup, checking leaks, and operating in bypass mode.
Guiding through backwash, brine, and rinse regeneration cycles.
Instructions for filling the salt tank and performing final verification.
Addresses failures in regeneration and causes of hard water.
Troubleshoots salt usage, water pressure loss, and mineral loss.
Resolves brine tank issues, salty service lines, and brine draw failures.
To Next Page