EasyManua.ls Logo

Waters Andrew+Robot - End of Life, Certification, and Contact; Unit End of Life; Electrical Safety and EMC Certification; FCC and Canadian Compliance

Waters Andrew+Robot
16 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Waters Corporation
34 Maple Street
Milford, MA 01757 U.S.A.
T: 1 508 478 2000
F: 1 508 872 1990
waters.com
[ ANDREW+ ROBOT USER GUIDE ]
Waters, The Science of What’s Possible, Andrew+, and OneLab are trademarks of Waters
Corporation. All other trademarks are the property of their respective owners.
©2021 Waters Corporation. Produced in the U.S.A. December 2022 720007741EN KK-PDF
Andrew Alliance S.A
(Headquarters)
Chemin Grenet 21 1214 Vernier
(Genève) Switzerland
T: +41 22 518 0357
VIII. UNIT END OF LIFE
IX. CERTIFICATION
Electrical safety
IEC61010 Issued: 2010/06/10 Ed:3 +
IEC61010-2-081 Issued: 2015/01
UL61010 Issued: 2004/07/12 Ed:2
Rev:208/10/28
CAN/CSA C22.2#61010-1
Issued:2004/07/12 Ed:2 (R2009)
EMC
CENELEC EN 61326-1 Issued :2006/05/01
ETSI EN 301 489-17
RADIO
ETSI EN 300 328, V1.9.1
EMF
EN 62479:2010
When a unit reaches the
end of its useful life, contact
Waters for directions and
information on the end-of-
life policy.
This is in accordance
with the European Union
Directive 2002/96/EC
on Waste Electrical and
Electronic Equipment
(WEEE).
FCC 47 CFR Part 18
This Class A digital apparatus complies with Canadian
ICES- 003
RoHS 2 2011/65/EU
X. CONTACT
i. How to contact the Andrew+ Robot’s support team
Chat with support directly in OneLab software
Send us an email to aa_support@waters.com
We will reply within 1 business day
This equipment has been tested and found to
comply with the limits for a class A digital device,
pursuant to part 15 of the FCC rules. These limits
are designed to provide reasonable protection
against harmful interference when the equipment
is operated in a commercial environment. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of these equipment in a residential area
is likely to cause harmful interference in which case
the user will be required to correct the interference
at his own expense. Modifications not expressly
approved by the manufacturer could void the user’s
authority to operate the equipment under FCC rules.
FCC
FCC 47 CFR 15B cl A Issued: 2011/04/21