EasyManua.ls Logo

Watersnake ASP T18-SW - TROUBLESHOOTING COMMON MOTOR ISSUES; Power Supply Problems Diagnosis; Noise and Vibration Troubleshooting; Further Motor Support Resources

Default Icon
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.watersnake.com.au
17
TROUBLESHOOTING
QUICK REFERENCE GUIDE
A significant number of issues can be caused by a disruption of power supplied
to your Watersnake motor. Careful inspection of your 12v deep cycle battery,
wiring and fuse / circuit breaker set up should be completed before assuming
that there is a fault with your motor.
NO POWER / REDUCED POWER
Check that battery connection has not been reversed (reversed polarity).
Check that your 12v deep cycle or LiFePO4 battery is fully charged (+ 12v).
Check terminals / connections are secure and not loose.
Check terminals / connections / fuse or circuit breaker for any signs of
damage, corrosion or build up of debris.
If the battery cable has been extended but not replaced, you may be
experiencing damaging voltage drop. Check the table on page 9 to see if you
have the correct gauge wire for the length of cable extension.
With the battery disconnected remove propeller and check for any build up
of fishing line / weed or any other debris.
With the battery disconnected check that propeller pin (shear pin) is in
place.
Armature or magnet cracked or dislodged – grinding noise will come from
motor (Contact the Watersnake distributor in your region.)
NOISE OR VIBRATION COMING FROM MOTOR
With the battery disconnected check that propeller is securely tightened and
shear pin is in place. Remove propeller and check for any build-up of fishing
line / weed or any other debris. Rotate the propeller 180º and then recheck
for vibration.
Check that your 12v deep cycle or LiFePO4 battery is fully charged (+ 12v).
STILL HAVING MOTOR ISSUES?
More information like wiring diagrams,
spare parts and motor repair videos can
be found on our Watersnake motor
support webpage:
https://www.watersnake.com.au/pages/electric-motor-servicing
For more help you can also contact the Watersnake distributor for your region.
( Please see the back cover. )
Scan the QR
code to go to
the Watersnake
support page.
Watersnake Asp Transom User Manual v3 2023-03-17.indd 17Watersnake Asp Transom User Manual v3 2023-03-17.indd 17 17/3/2023 4:36 pm17/3/2023 4:36 pm

Related product manuals