6
Watersnake Asp Transom Motor User Manual (Ver.3)
PRE INSTALLATION CHECKLIST
1. Familiarise yourself with the user manual and the various parts of your
Watersnake motor.
2. Select desired mounting location on boat/kayak.
3. 12V deep cycle or 12V LiFePO4 battery (your Watersnake motor IS NOT
designed for use with car / truck /motorcycle type batteries) – for more
information about appropriate batteries for your Watersnake motor, refer to
page 7.
4. Check battery cable length in relation to location of your 12v deep cycle or
12V LiFePO4 battery. If extension to battery cable is required, refer to table
on page 9. NOTE – if extending battery cable, ensure that the circuit breaker
remains in place on the positive wire.
PLEASE NOTE:
TERNARY LITHIUM BATTERIES MUST NOT BE USED WITH
THIS WATERSNAKE MOTOR. Refer to information on page 7.
THE BELOW INFORMATION IS FOR THE USA ONLY.
INSTALLATION
Watersnake Asp Transom User Manual v3 2023-03-17.indd 6Watersnake Asp Transom User Manual v3 2023-03-17.indd 6 17/3/2023 4:36 pm17/3/2023 4:36 pm
To Next Page
Loading...
