Watersnake ASP T18-SW - BEFORE YOU BEGIN: WATERSNAKE MOTOR PREPARATION; Battery Type Requirements; Fuse and Circuit Breaker Necessity; Battery Charging During Use

WELCOME TO WATERSNAKE
Congratulations and welcome to a world of silent motoring.
Powerful yet silent, the Watersnake electric motors are built to suit all angling
conditions. High quality materials, superior design and precision engineering
make these motors long-wearing and reliable.
IMPORTANT
Please read this manual completely before starting installation and using the
electric motor.
Disclaimer: The information provided in this Watersnake Motor Manual is correct at time of printing.
For the most up to date information, check for the latest version on our website at
https://www.watersnake.com.au/pages/watersnake-user-manuals
BEFORE YOU BEGIN:
Trolling motors are high-current devices that require an ideal power supply.
Follow these steps to avoid problems:
12V DEEP CYCLE
OR 12V LIFEPO4
BATTERIES ONLY
MORE INFO ON PAGE 7
EXTENDING THE
BATTERY CABLES?
IMPORTANT INFO ON PAGE 9
BATTERY CAN BE
CHARGED WHILE USING THE
MOTOR ONLY IF VOLTAGE
INPUT TO THE MOTOR IS
EQUAL OR LESS THAN 14.5V
MORE INFO ON PAGE 9
USE AN
INLINE FUSE OR
CIRCUIT BREAKER
(NOT INCLUDED)
MORE INFO ON PAGE 8
2
5
1
3
4
SUGGESTED BATTERY SIZE:
MOTOR SIZE BATTERY SIZE
18LB  24LB 40AH OR LARGER
34LB 60AH OR LARGER
44LB 80AH OR LARGER
54LB  65LB 100AH OR LARGER
Watersnake Asp Transom User Manual v3 2023-03-17.indd 2Watersnake Asp Transom User Manual v3 2023-03-17.indd 2 17/3/2023 4:36 pm17/3/2023 4:36 pm