Watson Marlow Pumps 630S User Manual

630 Bp/BpN Installation, operating, and maintenance manual
m-630bpn-en-08 1
Contents
1 Declaration of conformity 4
2 Declaration of incorporation 5
3 When you unpack your pump 6
3.1 Unpacking your pump 6
3.2 Packaging disposal 6
3.3 Inspection 6
3.4 Components supplied 6
3.5 Storage 6
4 Information for returning pumps 7
5 Peristaltic pumps - an overview 7
6 Warranty 8
7 Safety notes 9
8 Pump specifications 12
8.1 Specification ratings 12
8.2 Weights 12
8.3 Pumphead options 13
9 Good pump installation practice 14
9.1 General recommendations 14
9.2 Dos and don'ts 15
10 Pump operation 16
10.1 Keypad Layout and Key IDs 16
10.2 Starting and stopping 17
10.3 Using up and down keys 17
10.4 Maximum speed 17
10.5 Change rotation direction 17
11 Connecting to a power supply 18
11.1 Conductor colour coding 19

Watson Marlow Pumps 630S Specifications

General

Brand	Watson Marlow Pumps
Model	630S
Category	Water Pump
Language	English

Summary

Safety Notes and Precautions

General Safety Instructions

General safety instructions, hazard warnings, and PPE requirements for pump operation.

Hazard Symbols and Meanings

Explanation of warning symbols used in the manual and on the pump.

Pump Specifications

8.1 Specification Ratings

Detailed technical specifications and operating ratings for the pump.

Installation Practice: General Recommendations

9.1 General Recommendations

Recommendations for optimal pump siting, airflow, and ambient temperature.

Pump Operation: Keypad and Controls

10.1 Keypad Layout and Key IDs

Pump Operation: Basic Functions

10.2 Starting and Stopping

Connecting to Power Supply

11.1 Conductor Colour Coding

11.2 Wiring the US NEMA Module

Details on wiring the NEMA 4X modules and associated connectors.

11.3 Earth Screening

First-Time Pump Operation

14.1 Selecting Display Language

Mode Menu and Manual Operation

16 Mode Menu

17 Manual Mode Operations

Controls and functions for operating the pump in manual mode.

Manual Operation Controls

17.2 STOP Function

17.3 Adjusting Flow Rate

Using keys to increase or decrease the pump's flow rate.

Flow Calibration

18.1 Setting Flow Calibration

Procedure for calibrating the pump's flow rate for accurate dispensing.

PROFIBUS Mode Configuration

19.1 Mode Menu (PROFIBUS)

19.4 Assigning PROFIBUS Station Address

Steps to set the PROFIBUS station address on the pump.

19.5 PROFIBUS Communication Errors

Information on diagnosing and resolving PROFIBUS communication issues.

Main Menu and Settings

20.1 Security Settings

Configuration options for keypad lock, PIN protection, and user access.

20.2 General Settings

Troubleshooting and Support

22.1 Leak Detection

Information on the leak detection message and its resolution.

22.2 Error Codes

List of error codes, their conditions, and suggested actions.

22.3 Technical Support

Maintenance and Spares

25.1 Pumphead Replacement

Step-by-step guide for replacing the pumphead assembly.

26.1 Continuous Tubing Replacement