Contents
1 Declaration of conformity 5
2 Warranty 6
2.1 Conditions 6
2.2 Exceptions 7
3 When you unpack your pump 8
3.1 Packaging disposal 8
3.2 Inspection 8
3.3 Components supplied 8
3.4 Optional accessories 9
3.5 Storage 9
4 Information for returning pumps 10
5 Safety notes 11
6 Pump specifications 13
6.1 Pump specifications 15
6.2 Standards (ACmains power supply) 16
6.3 Standards (12-24V DC power supply) 17
6.4 Dimensions 18
6.5 Weights 19
7 Good pump installation practice 20
7.1 General recommendations 20
7.2 Do's and do not's 21
7.3 Pressure capability 21
7.4 Dry running 21
8 Connecting to a power supply 22
8.1 AC mains power supply 22
8.2 DC power supply option 23
9 Start-up check list 24
10 Automatic control wiring - Universal, Universal+ and Remote models
without relay modules 25
10.1 Input pin assignments at the pump 26
10.2 Optional input lead 26
10.3 Output pin assignments at the pump 27
10.4 Optional output lead 29
11 Automatic control wiring - 24V relay module and 110V relay module
(Universal and Universal+ only) 30
11.1 Module: cover removal and refitting 30
11.2 Wiring up the terminal connectors 31
11.3 24Vrelay module pcb connectors 34
m-qdos-en-02 2
To Next Page
Loading...
