Santa Clara, CA 95050
800.879.8585
Installation Instructions
Specifications
Voltages:
PW-100 & PW-200 . . . . . . . . . . . . . .120/230/277VAC, 50/60Hz
PW-100-347 . . . . . . . . . . . . . . . . . . . . . . . . . . .347VAC, 50/60Hz
Load Limits for each relay:
@120VAC . . . . . . . . . . . .0-800W tungsten or ballast, 1/6 HP
@230 or 277VAC . . . . . . . . . . . . . . . . . . . . . . .0-1200W ballast
@347VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0-1500W ballast
Load Type Compatibility:
Incandescent, fluorescent, magnetic or electronic ballast
Horsepower Rating (each relay) . . . . . . . . .1/6 HP @120VAC
Time Delay Adjustment . . . . . . . . . . . . . . . . . . . .5 to 30 minutes
Walk-Through Mode . .3 minutes if no activity after 30 sec.
Test Mode . . . 5 sec. at initial power up or DIP switch reset
PIR Adjustment . . . . . . . . . . . . . . . . . . .High or Low (DIP switch)
Light Level Adjustment . . . . . . . . . . . . . . . . . . . . . . .8fc to 180+fc
Alerts . . . . . . . . . . . . . . . . . . . . . .Selectable Audible & Visual
US Patents: 5640113, 6617560B2,
A4787722, A4874962
PW-200PW-100 & PW-100-347
PW-100/PW-100-347/PW-200
Passive Infrared Wall Switch
Occupancy Sensor
To Next Page
Need help?
General
