wattstopper PW-100 User Manual

Santa Clara, CA 95050
800.879.8585
Installation Instructions
Specifications
Voltages:
PW-100 & PW-200 . . . . . . . . . . . . . .120/230/277VAC, 50/60Hz
PW-100-347 . . . . . . . . . . . . . . . . . . . . . . . . . . .347VAC, 50/60Hz
Load Limits for each relay:
@120VAC . . . . . . . . . . . .0-800W tungsten or ballast, 1/6 HP
@230 or 277VAC . . . . . . . . . . . . . . . . . . . . . . .0-1200W ballast
@347VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0-1500W ballast
Load Type Compatibility:
Incandescent, fluorescent, magnetic or electronic ballast
Horsepower Rating (each relay) . . . . . . . . .1/6 HP @120VAC
Time Delay Adjustment . . . . . . . . . . . . . . . . . . . .5 to 30 minutes
Walk-Through Mode . .3 minutes if no activity after 30 sec.
Test Mode . . . 5 sec. at initial power up or DIP switch reset
PIR Adjustment . . . . . . . . . . . . . . . . . . .High or Low (DIP switch)
Light Level Adjustment . . . . . . . . . . . . . . . . . . . . . . .8fc to 180+fc
Alerts . . . . . . . . . . . . . . . . . . . . . .Selectable Audible & Visual
US Patents: 5640113, 6617560B2,
A4787722, A4874962
PW-200PW-100 & PW-100-347
PW-100/PW-100-347/PW-200
Passive Infrared Wall Switch
Occupancy Sensor

wattstopper PW-100 Specifications

General

Brand	wattstopper
Model	PW-100
Category	Accessories
Language	English

Summary

Unit Description and Operation

Turning the Load ON

Time Delays

SmartSet™ Auto Adjust Time Delay & Test Mode

PIR Sensitivity Adjustment

Installation

Wiring Diagrams

Illustrates wiring connections for PW-100, PW-100-347, and PW-200 models.

DIP Switch Settings

Time Delay Configuration

Explains how to set the time delay using DIP switches 1, 2, and 3.

PIR Sensitivity Configuration

Relay Mode Configuration

Explains how to set Relay 1 and Relay 2 modes (Auto On/Manual On) using DIP switches 8 and 9.

Adjustments

Light Level Adjustment

Reset to Default Settings

Troubleshooting

Lights Do Not Turn ON (LED Flashing)

Steps to diagnose why lights don't turn on when motion is detected and the LED flashes.

Lights Do Not Turn ON (LED Not Flashing)

Steps to diagnose why lights don't turn on when motion is detected and the LED does not flash.

Lights Do Not Turn OFF

Troubleshooting steps for when the lights fail to turn off after the time delay.