8
3. INSTALLATION
WARNING : Spa Installed on Inadequately level surfaces are subject to leaking. Forming
irregularities or collapses., which can result in property damage or serious injury for those in
or around the spa area!
CAUTION : Please choose your set-up area carefully as lawn and other desirable vegetation
underneath the ground cloth (if applicable) wil die. Furthermore, try to avoid setting the
ground cloth in areas prone to aggressive plant and weed species, as they may grow trough
the ground cloth.
3.1. Site selection
WARNING : Before proceeding to the installation of your spa, please make sure that the future location
meets the following conditions :
• A level place in order to avoid any defect, hernia or leakage.
• Wide enough to support the pool and its pump unit.
• Able to support more than 500 kg/m².
• Sheltered from the sun and bad weather.
• Clean and free from sharp objects.
• Devoid of aggressive vegetation on the ground.
Failure to comply with these rules may result in property damage or personal injury
A place with an awning Clean the place
A level place
3.2. RCD test
WARNING: The RCD plug must be tested before each use..
Do not use if RCD test fails and see chapter 6.1.
1. Insert the plug into the power
outlet.
2. Press the <<RESET>> button,
the indicator light turns red.
3. Press the <<TEST>> button,
the indicator light turns off.
4. Press the <<RESET>> button,
the indicator light turns red.
The RCD works properly.
To Next Page
Loading...
