To ensure that the user is aware of the presence of a strong eld, the device will
also give audible and vibratory warnings when the threshold dened by the user
is exceeded. This threshold can be changed, through the software delivered, by
connecting the WaveMon RF to a PC.
5. FALL WARNING
The WaveMon RF is equipped with a fall sensor and if it detects such an event,
the device will begin beeping until it is switched off. This feature makes it
possible to warn others nearby instantly if someone carrying a WaveMon RF
falls.
Note: the device will continue measuring and recording the electromagnetic eld even
after a fall is detected.
6. PLACING THE DEVICE
The device is supplied with a mount to which it may be attached using a quick
release mechanism. The device can be released from its mount easily with one
hand. This can be useful for checking a potential source of radiation before
approaching it, minimising the risk of exposure. This can be done simply by
holding it in your outstretched hand or using an extension attached to the tripod
socket if you wish to check from farther away.
Note: this holder is equipped with an RF absorber to minimise the effect of the body
on the measurement.
User’s Manual Personal equipment WaveMon P. 8
To Next Page
Loading...
Need help?
General