Need help?Do you have a question about the WAVECONTROL WaveMon RF and is the answer not in the manual?
General| Input Impedance | 50 Ohm |
|---|---|
| Input VSWR | < 1.5:1 |
| Connectivity | USB |
| Standards | FCC, IC |
| Sweep Time | 100 s |
| Amplitude Accuracy | ±1 dB |
Information on proper disposal of the old product and environmental protection.
Defines log interval and average interval for data storage and analysis.
Explains the format of logged data, including instantaneous, average, and max average values.
Step-by-step guide for installing the WaveMon Reader software and drivers.
How to run the software and connect the device to view measurements.
Configuration options for the device, including date, time, log intervals, and alarms.
Instructions for updating the device's firmware using the PC software.
Guide to registering the device with Wavecontrol's intranet for updates and support.
How to check battery status and replace batteries if needed.
Instructions on how to charge the WaveMon RF batteries via USB.
Steps to download and install the latest version of the PC software.
Steps to update the firmware of the WaveMon RF device.
Specifications and frequency response for the WaveMon RF-8 models.
Specifications and frequency response for the WaveMon RF-60 models.
Instructions on how to clean the WaveMon RF safely.
Recommendation for periodic device checks and calibration.
To Next Page