2. INTRODUCTION
The WaveMon RF is a personal electromagnetic eld monitor. Its main function
is to monitor the user’s exposure. For that purpose, it should be carried close
to the body to provide a warning in the event of overexposure. It may also be
placed in other locations to warn of high eld in areas of special interest that
we wish to monitor. The warning is given by means of audible signals (beeps),
vibration and visible signals (LEDs).
The WaveMon RF can measure power density continuously and store readings
in its internal memory. It has a capacity to store up to 1,000,000 readings.
Warnings are given based on instantaneous and/or average eld values.
Measurements are taken continuously and stored in memory to make it
possible to check whether exposure has exceeded the permitted limits, to what
extent, when and where (geographical position and altitude).
The information stored in memory can easily be downloaded to a PC via USB
for later processing.
3. MATERIAL INCLUDED
When you receive the device, please check the box to see if it is damaged in any
way. Make a note of any damage detected before you sign the delivery note.
User’s Manual Personal equipment WaveMon P. 4
To Next Page
Loading...
Need help?
General