WAVECONTROL WaveMon RF User Manual

Connect the WaveMon RF USB to
the PC. The program will detect and
start the connection process as
shown below.
Note: you do not need to turn on the
device before connecting the USB.
With the device connected, the
list of measurements taken by
the WaveMon RF appears on
the screen. Each measurement
contains the list of measurement
points.
When you click on a measurement,
the measurement points are
downloaded and the graph is
displayed. You can zoom into the
information by clicking on the graph
and selecting a square.
When a register is fully downloaded
to the computer, it will be available
for future consultation. If you wish to download the same register again, the
software will check whether the les in the WaveMon RF and in the computer
are identical before downloading it again.
These les are available in the Windows user’s folder, in
/Wavecontrol/WaveMon_Reader.
User’s Manual Personal equipment WaveMon P. 13

WAVECONTROL WaveMon RF Specifications

General

Brand	WAVECONTROL
Model	WaveMon RF
Category	Monitor
Language	English