To Next PageTo Next Page
Need help?Do you have a question about the Wayne EH and is the answer not in the manual?
Specifies the fuel input range for EH, EHA, and EHASR models.
Lists approved fuel types for the oil burners.
Provides height, width, and depth of the burner.
Describes available mounting configurations.
Details power supply requirements and motor details.
Explains the meaning and usage of the safety alert symbol.
Defines hazard levels: Danger, Warning, Caution, and Notice.
Outlines the limited warranty terms and conditions for the burner.
Suggests yearly inspection and service by qualified personnel.
Lists compliance with standards like ANSI/UL 296.
Explains how the manual is organized for troubleshooting.
Highlights distinctions between EHASR, EHA, and EH models.
Describes common components and their variations.
Lists common initial checks before diagnosing issues.
Provides a systematic guide for diagnosing and resolving burner problems.
Illustrates wiring for Honeywell R7284G and R8184G controls.
Shows wiring connections for the Honeywell R7284P control.
Describes how to perform an operational check of the burner.
Details the steps for starting the burner system.
Outlines procedures for verifying safety features.
Guidance on installing the combustion chamber for optimal performance.
Information on installing and using the single-stage fuel pumps.
Recommendations for installing fuel lines, including material and fittings.
Requirements for fuel tank installation and maintenance.
Instructions for connecting the burner to the electrical supply.
Guidelines for proper chimney installation and draft.
Instructions for installing draft regulators as per codes.
Requirements for adequate air supply for proper combustion.
Guidance on selecting appropriate nozzle and air cone types.
Steps for removing and installing the burner nozzle.
Details on positioning and attaching the mounting flange.
Step-by-step guide to initiate burner operation.
Procedures for making final burner adjustments using a test kit.
Steps to achieve optimal combustion efficiency and readings.
Annual maintenance tasks for the oil burner and its components.
Diagram identifying key features of the oil pump.
Reference for blower wheel spacing based on fan part number.
Diagram illustrating fuel line setup for two-pipe operation.
Formulas for calculating maximum fuel line length in one-pipe systems.
Example calculation for determining fuel line length.
Details on the limited warranty for Wayne burners.
General
